본문
코드명 | T-SERIES | |
생산지 | Made in SH | |
리드 타임 | 주문일로 4주 | |
제품 가격 | 별도 문의 | |
배송 정보 | 익일특송 Door to Door (DHL Express) | |
결제 방법 | 100% Upfront (세금계산서를 통한 내자거래) | |
보증 기간 | 1년간 무상보증 / 5,000시간 | |
비고 | 제품의 관부가세 및 배송비는 미포함 입니다. |


필드에서 1만시간 이상 검증 된 차세대 공냉식 시스템

T-시리즈 스펙시트
용량 선택: 1000W - 2500W - 5000W
MODEL
|
T-1000
|
T-2500
|
T-5000
|
Power Rating
|
0 to 1KW @ 20°C at 101.3 kPa |
0 to 2. 5KW @ 20°C at 101.3 kPa |
0 to 5KW @ 20°C at 101.3 kPa |
Current Rating
|
0 to 19A @54V |
0 to 47A @54V |
0 to 47A *2 @54V |
OPERATION
| |||
Voltage Adjustable
|
43.2 to 57.6 Vdc or 24V 버전 (24V 버전은 시간이 좀 소요됩니다.) | ||
Voltage ripple
|
±1V | ||
Altitude De-rating
|
3.5% per 500m over 1,000m | ||
Temperature De-rating
|
1.25% per °C over 40°C | ||
Standby Power Consumption
|
Approximately<3% at peak power (DC) | ||
Reactants
|
Hydrogen and Air | ||
Cooling
|
Air (integrated cooling fan) | ||
H2 inlet pressure
|
0.55-0.75bar | ||
Hydrogen purity
|
≧99.995﹪ dry H2 | ||
Consumption
|
≦0.78 Nm3/kWh (Average at max. load) | ||
Start up time
|
≦2minute at ambient temperature | ||
Efficiency of stack
|
≧42% at peak power | ||
Max noise
|
Normal operation: <70 dBa at 1.5 meters | ||
FOOTPRINT
| |||
Controller Dimension (WxDxH)
|
430mm x 450mm x 150mm |
430mm x 620mm x 150mm |
(430mm x 620mm x 150mm )*2 |
Stack Dimension (WxDxH)
|
430mm x 450mm x 267mm |
430mm x 620mm x 356mm |
(430mm x 620mm x 356mm )*2 |
Controller Weight
|
10 kg |
15 kg |
15*2 kg |
Stack Weight (with accessory and case)
|
18 kg |
40.3 kg |
40.3*2 kg |
ENVIRONMENT CONDITION
| |||
Ambient temperature
|
-10°C to + 45°C Standard (winter kit needed when temperature is below 0°C,during operation) | ||
Recommended cold start temp
|
Above 5° C | ||
Relative Humidity
|
0‐95% Non‐Condensing | ||
Storage Temperature
|
﹣20°C to + 50°C Standard | ||
COMMUNICATION
| |||
Communications
|
RS485 or RS232 |
* 순수 수소용 시스템 입니다.
* 해당 시스템은 Battery를 충전, Start Voltage로 사용하는 양방향 DCDC가 내장되어 있습니다.
* 24V / 48V 옵션 선택가능합니다.
필드에서 1만시간 이상 검증 된 차세대 공냉식 시스템


시스템 파트별 명칭 1.
A: LCD display
B: Air inlet of ECOBOX-MR25S1 controller
C: Fixed orifice
D: Air inlet of ECOBOX-MR25S1 stack
E: Fixed orificeF: System output+/- connector
G: Air outlet of ECOBOX-MR25S1 controller
H: FC+/- connector
I: RS232 connector
J: Input signal connector (including 0.3Bar pressure switch; 0.5Bar pressure switch; main power signal and door signal)
K: H2 sensor connector
L: Output signal connector (including warning signal; system operation signal; system error signal)
M: FC+/- connector
N: FC connector
O: H2 input (low pressure, suggest adjusted by pressure regulator from 0.55Bar to 0.75Bar)
P: 0.3Bar pressure switch
Q: Pressure regulator
R: 0.5Bar pressure switch
S: H2 input (middle or high pressure, suggest from 1.2Bar to 2Bar)
T: Air outlet of ECOBOX-MR25S1 stack
U: H2 output (suggest to connect with a tube to extend to the outside)

시스템 파트별 명칭 2.


✔ 시스템 Integration이 쉽습니다. OEM 또한 가능합니다.

✔ 지금바로 견적서 요청하기